GW Instek LCR Series - Page 13

GETTING STARTED
13
 Open circuit/short circuit/load calibration
function
 Meter mode, multi step list mode, sweep mode
 Up to four component parameters can be
selected in the electric meter mode. The
induction and DCR values can be measured and
displayed simultaneously
 Up to 48 sets of multistep list programs can be
stored in the permanent memory and up to 15
test steps can be arranged in each program
 7" 800*480 TFT LCD color screen
 Ultra-low power consumption (<65VA) without
fans and zero noise
Interface
 Rapid automation and data access function is
realizable for USB, LAN, GPIB and RS232
interfaces
 PC connection data save software is stander
 Auto component classification: Comparator
function and Handler BIN classification function
 Input: Trigger signal.