GW Instek LCR Series User Manual

GETTING STARTED
17
6
DC BIAS
For control the Bias unit and for
executing on/off.
7
Key Lock
The key will be locked to prevent from
controlling the push key and the
computer by both sides. To use the
keypad again, press this key again.
8
ESC
Press this button to return the cursor
to the top left corner of the currently
displayed page or cancel current
setting.
9
Numeric
The numeric keypad is used to input
values for setting.
10
Setup
This key is used for entering
measurement setup page.
11
Arrow Keys
/Enter
The arrow keys are used to navigate
the cursor on the screen.
Enter key is used to confirm the value
which input from the numeric keypad.
When a flash drive is inserted from the
USB port on the front panel. Press
Enter to detecting USB disk and show
USB disk management page.
12
Measure
This key is used for entering
measurement setup page.
13
System
This key is used for entering system
setup page.
14
LCD
7” TFT- LCD display.
15
USB port
The Host port is a type A USB port for
logging data and connecting USB
memory devices only.
USB disk type: Flash drive only
Format: FAT32/exFAT
Max memory size: 128GB.

GW Instek LCR Series Specifications

General

Brand	GW Instek
Model	LCR Series
Category	Measuring Instruments
Language	English