GW Instek LCR Series User Manual

MEASURE (METER MODE)
55
△
The difference between the measured
value and the NOMINAL value is
compared.
Absolute value (Δ) = measure value –
nominal value
Select this mode, the NOMINAL value
and UPPER and LOWER upper and
lower limits must be set.
△%
The difference between the measured
value and the NOMINAL value is
compared with the percentage of the
NOMINAL value.
Deviation percentages (Δ%) = Absolute
value (Δ)/nominal value × 100%
Select this mode, the NOMINAL value
and UPPER and LOWER upper and
lower limits must be set.

GW Instek LCR Series Specifications

General

Brand	GW Instek
Model	LCR Series
Category	Measuring Instruments
Language	English