HEIDENHAIN TNC 620 Programming Station

Programming Qparameters | Additional functions
9
Error number Text
1173 Probing object contains different types of dimen-
sion definition
1174 Dimension definition contains impermissible
characters
1175 Actual value in dimension definition faulty
1176 Starting point of hole too deep
1177 Dimension def.: Nominal value missing for manual
pre-positioning
1178 A replacement tool is not available
1179 OEM macro is not defined
1180 Measurement not possible with auxiliary axis
1181 Start position not possible with modulo axis
1182 Function only possible if door is closed
1183 Number of possible records exceeded
1184 Inconsistent machining plane due to axis angle
with basic rotation
1185 Transfer parameter contains an impermissible
value
1186 Tooth width RCUTS is defined too large
1187 Usable length LU of the tool is too small
1188 The defined chamfer is too large
1189 Chamfer angle cannot be machined with the
active tool
1190 The allowances do not define any stock removal
1191 Spindle angle not unique
296
HEIDENHAIN | TNC620 | Klartext Programming User's Manual | 01/2022