91
────────────────────────────────────────────────────
7.1 Capabilities in Demand Measurement Mode
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
●Data processing
(1) When a printer is connected: Measured values can be printed automatically or
manually.
(2) When an FDD unit is connected: Measured values can be saved to floppy disk
automatically or manually.
(3) When the D/A output connector is installed: Measured values can be converted
from digital to analog signals and output (for analog recording).
●Remote control
(1) Integration can be started under the control of remote control signals.
(2) When a printer is connected: Measured values can be printed under the
control of remote control signals.
(3) When an FDD unit is connected: Measured values can be saved to floppy disk
under the control of remote control signals.
To Next Page
