Hioki 3166 - Flow of the Basic Operating Procedure

162
────────────────────────────────────────────────────
11.2 Overview of the RS-232C Interface
────────────────────────────────────────────────────
1
1.2.3 Flow of the Basic Operating Procedure
Connect the RS-232C cable
Connect the power meter to the line being measure
d
Control the power meter remotely by sending commands
from the personal computer
Turn the power meter and the personal computer o
n
Set the communication conditions for the personal computer
Set the baud rate, the data length, parity checking,
stop bits, flow control and the delimiter