Hioki 3166 - Chapter 8 Setting Mode (Function Setting) Details; List of Setting Items

123
────────────────────────────────────────────────────
8.1 List of Setting Items
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
Chapter
8
Setting Mode (Functio
n
Setting) Detai
ls
8
.1 List of Setting Items
The setting of basic functions that are common to all of the measurement
modes is performed in "Setting" mode.
The settings can be output to the printer.
This chapter explains the items that can be set or changed in "Setting" mode
in detail.
Settings for the following functions can be made.
For details on the methods for setting these functions, refer to section 2.1,
"Basic Operations."
(1) Reactive power meter method
(2) Sampling method
(3) PLL sync/frequency source
(4) Frequency on line being measured
(5) Display averaging times
(6) PT
(7) CT
(8) Backlight
(9) Contrast
(10) Key beep
(11) RS-232C device
(12) Setting the time
(13) System reset