Hioki 3166 - Safety Notes

iii
────────────────────────────────────────────────────
Safety Notes
────────────────────────────────────────────────────
DANGE
R
This product is designed to conform to IEC 61010 Safety Standards, and
has been thoroughly tested for safety prior to shipment. However,
mishandling during use could result in injury or death, as well as damage
to the product. Be certain that you understand the instructions and
precautions in the manual before use. We disclaim any responsibility for
accidents or injuries not resulting directly from product defects.
DANGE
R
To avoid short circuits and potentially life-threatening hazards, never
attach the clamp to a circuit that operates at more than the 600 V (9291)
/300 V (9298) or over bare conductors.
・The this symbol printed on the product indicates that the user
should refer to a corresponding topic in the manual (marked with
the
symbol) before using the relevant function.
・In the manual, this symbol indicates particularly important
information that the user should read before using the product.
Indicates a grounding terminal.
Indicates AC (Alternating Current).
S
afety Notes
This manual contains information and warnings essential for safe operation of
the product and for maintaining it in safe operating condition. Before using
the product, be sure to carefully read the following safety notes.
Safety symbols