Hioki 3166 - Chapter 3 Before Taking Measurements

17
────────────────────────────────────────────────────
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
CAUTIO
N
This product should be installed and operated indoors only, between 0 and 40
℃ and 80% RH or less.
NOTE
Chapter
3
Before Takin
g
Measuremen
ts
This chapter explains how to connect the voltage cords, the clamp on sensor,
and the power cord, how to turn on the power, and how to execute the self-
test.
Before using the unit, make sure that the sheathing on the 9438, 9291, or
9298 are not damaged and that no bare wire are exposed. If there is damage,
using the unit could cause electric shock. Contact your dealer or HIOKI
representative.