Hioki 3166 - Key Beep; RS-232 C Device

130
────────────────────────────────────────────────────
8.2 Settings for Each Item
────────────────────────────────────────────────────
8
.2.10 Key Beep
8
.2.11 RS-232C Device
This item turns the key beep sound on and off.
When the key beep sound is on, it provide audible confirmation that a key was
pressed.
Options: ON/OFF
*ON
Example Turning key beeps on
Position the cursor at "Key beep (KEY BEEP)" item.
Press the ON function key.
"ON" is displayed in the "Key beep" field.
●Items that can be changed when the "Function Settings" screen
(page 2/2) is displayed
Refer to section 8.2, "Settings for Each Item."
This item selects the type of device connected to the RS-232C interface.
There are also special settings for each different type of device (printer,
personal computer, or modem).
Options: PRINTER, COMPUTER, MODEM
* PRINTER
Example Changing the connected device to a printer
Position the cursor at "RS-232C device (RS-232C DEVICE)" item.
Press the PRINTER function key.
The "Printer Interface Setting" window is displayed.
Check the printer settings.
If there are no changes that need to be made, press the CLOSE key.
The "Printer Interface Setting" window closes, and "PRINTER" is set and is
displayed in the "RS-232C device" field.
Example Checking or changing the printer settings
Press the PRINTER function key.
The "Printer Interface Setting" window is displayed.
Check the printer settings and make new settings.