Hioki 3166 - Transformer Capacity

114
────────────────────────────────────────────────────
7.5 Changing Settings
────────────────────────────────────────────────────
7
.5.4 Transformer Capacity
Transformer Capacity Setting
NOTE
The usage factor can be measured by the average power used versus the
transformer capacity. If not used, setting "0000.000 kVA" will result in no
measurement value being displayed.
Setting range: 0000.000 to
1000.000 kVA
(0.001 kVA steps)
* 0010.000 kVA
Refer to section 18.3, "Measurement Items and Calculations," for details on
the usage factor.
Example Setting the transformer capacity to "200 kVA"
Assume that the current setting is the factory setting, "0010.000 kVA."
Position the cursor at "Transformer capacity (TRANS. CAPACITY)." The
cursor will appear at the first digit.
Position the cursor at the hundred’s digit.
Using the ＋ and − function keys, set the digit to "2".
Position the cursor at the ten’s digit.
Using the ＋ and − function keys, set the digit to "0".
The transformer capacity is now set to "0200.000 kVA".