Hioki 3166 - Other Items (Common with the Setting Mode)

120
────────────────────────────────────────────────────
7.5 Changing Settings
────────────────────────────────────────────────────
7
.5.11 Other Items (Common With the Setting Mode)
NOTE
●Items that can be changed when the "Demand Measurement
Settings" screen (page 2/2) is displayed
Pressing the NEXT function key calls up the "Demand Measurement Settings"
screen (page 2/2).
Items that are set on the "Demand Measurement Settings" screen (page 2/2)
can be set or changed in the "Setting" mode. For details on how to make these
settings, refer to chapter 8, "Setting Mode (Function Setting) Details."
(1) Reactive power measurement method
(2) Sampling method
(3) PLL sync/frequency source
(4) Frequency of the line being measured
(5) Display averaging times
(6) PT
(7) CT
(8) Backlight
(9) Contrast
(10) Key beep