Hioki 3166 - Other Items (Common with the Setting Mode)

59
────────────────────────────────────────────────────
5.5 Changing the Settings
────────────────────────────────────────────────────
5
.5.4 Other Items (Common With the Setting Mode)
NOTE
●Items that can be changed when the "Normal Measurement Settings"
screen (page 2/2) is displayed
If the NEXT function key is pressed, the "Normal Measurement Settings"
screen (page 2/2) is displayed
Items that are set on the "Normal Measurement Settings"screen (page 2/2) can
be set or changed in the setting mode. For details on how to make these
settings, refer to chapter 8, "Setting Mode (Function Setting) Details."
(1) Reactive power measurement method
(2) Sampling method
(3) PLL sync/frequency source
(4) Frequency of the line being measured
(5) Display averaging times
(6) PT
(7) CT
(8) Backlight
(9) Contrast
(10) Key beep