Hioki 3166 - Notes on Use

vi
────────────────────────────────────────────────────
Notes on Use
────────────────────────────────────────────────────
CAUTIO
N
・This product is designed for indoor use, and operates reliably from 0 to 40℃
.
・Do not store or use the product where it could be exposed to direct sunlight,
high temperature or humidity, or condensation. Under such conditions, the
product may be damaged and insulation may deteriorate so that it no longer
meets specifications.
・This product is not designed to be entirely water- or dust-proof. To avoid
damage, do not use it in a wet or dusty environment.
・Do not use the product near a device that generates a strong
electromagnetic field or electrostatic charge, as these may cause erroneous
measurements.
・Do not use the product where it may be exposed to corrosive or combustible
gases. The product may be damaged or cause an explosion.
WARNIN
G
To avoid electric shock, do not allow the product to get wet, and do not
use it when your hands are wet.
To avoid electric shock when measuring live lines, wear appropriate
protective gear, such as insulated rubber gloves, boots and a safety
helmet.
WARNIN
G
The unit is constructed so as to be connected to a ground line via a
three-core power cord that is supplied with the unit.
To avoid electric shock and ensure safe operation, connect the power
cable to a grounded (3-contact) outlet.
N
otes on Use
Follow these precautions to ensure safe operation and to obtain the full
benefits of the various functions.
●
Installation
● Before use
Observe the following points in order to use this equipment safely and most
effectively.
●
Making power meter connections