Hioki 3166 - Inspection

ii
────────────────────────────────────────────────────
Inspection
────────────────────────────────────────────────────
NOTE
I
nspection
When you receive the product, inspect it carefully to ensure that no damage
occurred during shipping. In particular, check the accessories, panel switches,
and connectors. If damage is evident, or if it fails to operate according to the
specifications, contact your dealer or Hioki representative.
Standard accessories
Instruction Manual 1
Guide 1
Power cord 1
9438 VOLTAGE CORD 1set
(one each of black, red, yellow, and blue)
Voltage cord lock 4
Stand 1set
Before use
Before using the product the first time, verify that it operates normally to
ensure that the no damage occurred during storage or shipping. If you find
any damage, contact your dealer or Hioki representative.
Before using the product, make sure that the insulation on the 9438
VOLTAGE CORD is undamaged and that no bare conductors are improperly
exposed. Using the product in such conditions could cause an electric shock,
so contact your dealer or Hioki representative for repair.
Shipment
Use the original packing materials when reshipping the product, if possible.
Before shipping the 9595 FDD UNIT, be sure to remove the floppy disk.