Hioki 3166 - Other Items (Common with the Setting Mode)

86
────────────────────────────────────────────────────
6.5 Changing Settings
────────────────────────────────────────────────────
6
.5.12 Other Items (Common With the Setting Mode)
NOTE
●Items that can be changed when the "Integrated Measurement
Settings" screen (page 2/2) is displayed
If the NEXT function key is pressed, the "Integrated Measurement Settings"
screen (page 2/2) is displayed
Items that are set on the "Integrated Measurement Settings" screen (page 2/2)
can be set or changed in the "Setting" mode. For details on how to make these
settings, refer to chapter 8, "Setting Mode (Function Setting) Details."
(1) Reactive power measurement method
(2) Sampling method
(3) PLL sync/frequency source
(4) Frequency of the line being measured
(5) Display averaging times
(6) PT
(7) CT
(8) Backlight
(9) Contrast
(10) Key beep