Hioki 3166 - Saving Measured Values on Floppy Disk

53
────────────────────────────────────────────────────
5.4 Taking Measurements
────────────────────────────────────────────────────
5
.4.4 Saving Measured Values on Floppy Disk
NOTE
1. While the measurement screen is displayed, press the SAVE key.
2. The "time" and the "measurement values" that were selected as the "
print/save items" are saved under a file name that is assigned automatically.
Nothing is selected for the initial setting for the "print/save value" when the
power meter is shipped from the factory. For details on how to change the
items that are to be saved, refer to section 5.5.1, "Print/Save Items" and
section 5.5.2, "File Names."
In order to save measurement data to floppy disk, the optional 9595 FDD
UNIT must already be connected to the 3166.