x
────────────────────────────────────────────────────
Chapter Summary
────────────────────────────────────────────────────
hapter Summary
The contents of each chapter of this Operation Manual are described below.
The portion of this manual from the Introduction to Chapter 1 explains
numerous cautions that must be read before using this power meter.
Chapter 1 Overviews and Names of Parts
This chapter provides an overview of this product and its features, and
describes the names of each part.
Chapter 2 Key Operations and the Initial Screen
This chapter explains the basic use of each key, the initial screen, and the
configuration of the screen in general.
Chapter 3 Before Taking Measurements
This chapter explains the necessary preparations that must be made before
beginning operation, and describes cautions that need to be observed.
Chapter 4 Wiring Methods
This chapter explains how to select and connect the line being measured, and
how to check for incorrect wiring after the connections have been made.
Chapter 5 Normal Measurement
This chapter explains how to measure instantaneous values and
maximum/minimum values for basic measurements such as voltage current
and power, special settings that need to be made for those measurements, how
to save the measured results onto floppy disk, how to print out measured
results, etc.
Chapter 6 Integrated Measurement
In addition to normal measurements such as instantaneous values, this
chapter explains how to measure integrated values such as active and reactive
power, special settings that need to be made for those measurements, how to
save the measured results onto floppy disk, how to print out measured results,
etc.
Chapter 7 Demand Measurements
This chapter explains the demand measurement method in which data is
processed with integrated measurements repeated at any desired time
interval, and special settings that need to be made for those measurements,
how to save the measured results onto floppy disk, how to print out measured
results, etc.
Chapter 8 Setting Mode (Function Setting) Details
This chapter provides an overview of setting methods and also explains
detailed setting methods for test conditions that are common to each mode.
To Next Page
