xi
────────────────────────────────────────────────────
Chapter Summary
────────────────────────────────────────────────────
Chapter 9 Using the External Control Terminal
This chapter explains how to use external control signals to control the start of
integrated or demand measurement, to control the saving and printing of
measurement data, etc.
Chapter 10 Connecting a Printer
This chapter explains how to connect a printer to the interface connector and
the necessary settings.
Chapter 11 Connecting a Computer
This chapter explains how to connect a computer to the interface connector,
the necessary settings, and a sample program.
Chapter 12 Connecting a Modem
This chapter explains how to connect a modem to the interface connector, the
necessary settings, and a sample program.
Chapter 13 Using the D/A Output (Optional)
This chapter explains how to connect the optional 9594 D/A OUTPUT in order
to obtain analog output, and the necessary settings.
Chapter 14 Using the Floppy Disk Drive (Optional)
This chapter explains how to connect the optional 9595 FDD Unit in order to
use floppy disks, and provides an overview of how to use the unit.
Chapter 15 Harmonic Wave Analysis Software (Optional)
This chapter provides an overview of how to use the optional 9556 Harmonic
Wave Analysis Software in order to measure harmonic waves.
Chapter 16 Operation If Power Is Lost
This chapter describes the operation of the power meter if power is lost while
taking measurements.
Chapter 17 Maintenance and Service
This chapter discusses the maintenance and disposal of this unit.
Chapter 18 Specifications
This chapter describes the specifications for this power meter, including its
general specifications, measurement ranges, and accuracy.
Appendices
The appendices include a list of error messages, a list of commands, screen
configurations, details on how to pack the unit in its portable case, a glossary
of terms, and other information.
To Next Page
