95
────────────────────────────────────────────────────
7.3 Preparations for Measurement
────────────────────────────────────────────────────
Demand Measurement Settings (page 1/2)
(2) Necessary settings for demand measurement
1. Start time
2. Stop time
3. Demand period
4. Transformer capacity
(3) Setting the functions that can be used
1. Print/Save items
2. FD auto output
3. File name
4. RS-232C automatic output
5. D/A Output Items
6. Integrated output rate
(4) Basic settings screen
1. Press the
NEXT function key.
2. The "Demand Measurement Settings" screen (page 2/2) is displayed. The
basic settings required for measurement are displayed on this screen, and can
be set and checked on this screen as well.
Note that the settings on this screen are common to both "Normal
Measurement" mode and "Integrated Measurement" mode.
3. Pressing the
PREVIOUS function key returns the display to the "Demand
Measurement Settings" screen (page 1/2). Pressing the
RET. function key
returns the display to the "Instantaneous Value" screen.
To Next Page
