Hioki 3166 - Page 169

147
────────────────────────────────────────────────────
10.2 Information That Can Be Printed Out
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
1
0
1
1
1
2
3
4
5
6
7
8
9
1
0
1
1
1
2
1
3
1
4
A
3.Instantaneous values
Instantaneous value dat
a
at time of printing
Voltage（U1, U2, U3, Uave
）
Current（I1, I2, I3, Iave）
Power（P, Q, S, λ, ｆ）
4.Maximum values
Voltage（U1, U2, U3, Uave
）
Current（I1, I2, I3, Iave）
Power（P, Q, S, λ, ｆ）
5.Minimum values
Voltage（U1, U2, U3, Uave
）
Current（I1, I2, I3, Iave）
Power（P, Q, S, λ, ｆ）
6.Power integration
Active power
(＋WP, −WP, ΣWP)
Reactive power
(＋WQ, −WQ, ΣWQ)
Apparent power
(＋WS, −WS, ΣWS)
7.Average value within a
time period
Integrated average
values within a time
period, based on the
power integration
Power（P, Q, S, λ）
1.Date and time of printing
2.Demand start time
3.Instantaneous values
Instantaneous value dat
a
at time of printing
Voltage（U1, U2, U3, Uave
）
Current（I1, I2, I3, Iave）
Power（P, Q, S, λ, ｆ）
* The minimum/maximum value data the time at which each
minimum/maximum value was generated
* Items 4 through 7 reflect data that was tabulated until the time of printing
from the integrated measurement start time.
●"Demand Measurement" mode
The following demand, integration, daily report, weekly report, and monthly
report data can be saved.