Hioki 3166 - Page 171

149
────────────────────────────────────────────────────
10.2 Information That Can Be Printed Out
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
1
0
1
1
1
2
1
3
1
4
A
CAUTIO
N
In the case of demand measurement, the print/save item settings are made in
a special manner as described below.
1) First, set to "ON" all of the necessary items from among daily report, weekly
report, monthly report, demand measurement and integrated measurement.
(Multiple items may be set.)
2) Next, set the items that are to actually be output from among the
instantaneous values, maximum values, minimum values, integrated power
levels, and average values over time; these items are set in common with
the items selected in step 1 above. (Multiple items may be set.)
3) In short, only the items selected in both step 1 (tabulation period) and step 2
(output items) are selected and valid initially. If only one setting is set to
"ON", nothing is output.
(2) Setting conditions
All setting conditions can be printed out, whether from the setting screen for a
given measurement mode, or from "Setting" mode.