256
────────────────────────────────────────────────────
13.4 Output Waveform
────────────────────────────────────────────────────
NOTE
In the integrated measurement mode or in the demand measurement mode,
outputs are held when the window shown below is kept open. Note that
outputs are updated each time the preset output interval or demand time
elapses.
1. Display selection window
2. Page selection window
3. Basic setting window (This window displayed when the WIRING or iUi or iiIii key
is pressed on a screen other than the Instantaneous Value Screen.
4. Check window (This window displayed when the CHECK key.)
5. Setting screen
To Next Page
