Hioki 3166 - Page 362

APPENDIX 28
────────────────────────────────────────────────────
Appendix 6 Packing the 3166 in the 9383 Carrying Case
────────────────────────────────────────────────────
Voltage cor
d
Instruction manua
l
Indication window
FD output por
t
＊Fix to belt afte
r
attached.
3166,959
5
Clamp on sensor
s
Packing the 3166 Into the Carrying Case
NOTE
Appendix 6 Packing the 3166 in the 9383 Carrying Cas
e
The optional 9383 CARRYING CASE is useful when you need to carry the
3166 and take measurements in the field. The carrying case can accommodate
the 3166 with the 9595 FDD UNIT attached, three 9291 CLAMP ON
SENSOR, the 9438 VOLTAGE CORD, the instruction manual, and other
items.
The carrying case includes a window that allows you to read the display
screen without needing to remove the 3166 from its carrying case. A side flap
also allows you to insert and remove floppy disks.
Reference When putting the 3166 with the 9595 FDD UNIT attached into the carrying
case, remove the sponge padding from the carrying case.
・The carrying case is not designed to be waterproof or dustproof. Do not use
the carrying case under dusty or wet conditions.
・Gently wipe dirt from the surface of the 3166 to the carrying case unit with
a soft cloth moistened with a small amount of water or mild detergent. Do
not try to clean the unit using cleaners containing organic solvents such as
benzine, alcohol, acetone, ether, ketones, thinners, or gasoline. They may
cause discoloration or damage.