Hioki 3166 - Page 4

Chapter 5 Normal Measurement 43
5.1 Capabilities in Normal Measurement Mode 44
5.2 Flow Chart of Basic Operating Procedure 45
5.3 Preparations for Measurement 46
5.3.1 Selecting the Measurement Mode and Checking
the Basic Setting Conditions
46
5.3.2 Confirming Settings
47
5.4 Taking Measurements 49
5.4.1 Displaying Instantaneous Values
49
5.4.2 Displaying Minimum/Maximum Values
51
5.4.3 Printing Measured Values on the Printer
52
5.4.4 Saving Measured Values on Floppy Disk
53
5.5 Changing the Settings 54
5.5.1 Print/Save Items
54
5.5.2 File Names
55
5.5.3 D/A Output Items
58
5.5.4 Other Items (Common With the Setting Mode)
59
5.6 Printing Out the Settings 60
5.7 Saving the Settings to Floppy Disk 61
Chapter 6 Integrated Measurement 63
6.1 Capabilities in Integrated Measurement Mode 63
6.2 Flow Chart of Basic Operating Procedure 65
6.3 Preparations for Measurement 66
6.3.1 Selecting the Measurement Mode and Checking
the Basic Setting Conditions
66
6.3.2 Special Settings for Integrated Measurement
67
6.4 Taking Measurements 70
6.4.1 Clearing Measurement Data and Setting the Range
70
6.4.2 Starting Integrated Measurement
71
6.4.3 Stopping Integrated Measurement
72
6.4.4 Displaying Instantaneous Values
73
6.4.5 Displaying Minimum/Maximum Values
74
6.4.6 Displaying Integrated Values
75
6.5 Changing Settings 78
6.5.1 Integration Start Method
78
6.5.2 Start Time
78
6.5.3 Integration Stop Method
79