64
────────────────────────────────────────────────────
6.1 Capabilities in Integrated Measurement Mode
────────────────────────────────────────────────────
●Data processing
(1) When a printer is connected: Measured values can be printed automatically or
manually.
(2) When a FDD unit is connected: Measured values can be saved to floppy disk
automatically or manually.
(3) When the D/A output connector is installed: Measured values can be converted
from digital to analog signals and output (for analog recording).
●External control
(1) Integration can be started/stopped under the control of external control
signals.
(2) Integrated value data can be reset under the control of external control
signals.
(3) When a printer is connected: Measured values can be printed under the
control of external control signals.
(4) When a FDD unit is connected: Measured values can be saved to floppy disk
under the control of external control signals.
To Next Page
