Table 28 Local Copy > Business Copy Z/Compatible FlashCopy (continued)
Audit Log OutputGUI operation
Operation NameFunction NameDescriptionSubmenu
CTG(Note)BC ZAdd Consistency Group
Delete Consistency Group
CTG
Set SCP Time(Note)FCSet SCP Delay TimeFCV2
Note: When you apply two or more settings of the same type to the storage system at the same
time, the log information is output as one entry.
Table 29 Remote Copy > Continuous Access Synchronous
Audit Log OutputGUI operation
Operation NameFunction NameDescriptionSubmenu
Paircreate (Note 1)Cnt Ac-SPaircreate(Cnt Ac-S)Pair Operation
Pairsplit-S (Note 1)Cnt Ac-SPairsplit-S(Cnt Ac-S)
Pairsplit-r (Note 1)Cnt Ac-SPairsplit-r(Cnt Ac-S)
Pairresync (Note 1)Cnt Ac-SPairresync(Cnt Ac-S)
Change Pair Option (Note 1)Cnt Ac-SChange Pair Option
Add RCURCUAdd RCURCU Operation
Change RCU OptionChange RCU Option
Delete RCUDelete RCU
Add Path (Note 1) (Note 2)Add Path
Delete Path (Note 1) (Note 2)Delete Path
Add RCUAdd SSID
Delete RCUDelete SSID
Edit Ports(Attr)PROVChanging port attribute (Target,
Initiator, RCU Target)
Change OptionCnt Ac-SOptionSystem Option
Function SwitchCnt Ac-SFunction Switch
Note 1: When you apply two or more settings of the same type to the storage system at the same
time, the log information is output as one entry.
Note 2: If one or more settings end abnormally when you have applied at one time, the output
log information is Error, not Warning.
Using Actions menu 203