3.9 Gateway Parameter Configuration Tool
A3-163
ME0384-4A
[Diagnostic information]
The scan time of the driver unit, the number of communication errors (ERRC, ERRT) and the
number of stops (EMG) detected can be counted.
When there is an option unit connected, the scan time and the number of communication errors
of the option unit should be displayed.
[Alarm list]
Press "Refresh" to read out the alarm list again from the gateway unit.
Press "Clear" to delete all alarm lists held by the gateway unit.
Press "Save" to save the alarm list held by the gateway unit in CSV format.
For the alarm details, refer to "Maintenance Section Chapter 2 Troubleshooting".
To Next Page
Loading...
Need help?
General
