IAI Rcon User Manual

5.2 How to Read the Model Number
A5-4
ME0384-4A
Chapter 5 200V Driver Unit 200V Power Supply Unit
Specifications Section
How to read the model nameplate
[200V Driver Unit]
Model number→
Serial number→
Type / Serial number →
Model number→
[200V Power Supply Unit]
Model number→
Serial number →
Type→
Mark Explanation of Mark
Where residual-current-operated protective device (RCD) is used for protection in case of direct
or indirect contact, only RCD of Type B is allowed on the supply side of this Electrotonic
Equipment (EE).
Do not touch terminals within 10 minutes after disconnect the power.
Risk of electric shock.
Do not touch product when power is ON. Risk of burn.
[Nameplate Location]
[Nameplate Location]
↑Serial number
Connecting actuator
→
model number
Caution Mark
High Temperature
Caution Mark
Electric Shock
Caution Mark
Caution Mark
High Temperature
Caution Mark
Electric Shock
Caution Mark

IAI Rcon Specifications

General

Brand	IAI
Model	Rcon
Category	Controller
Language	English