IAI Rcon - Editing Driver Unit Configuration

3.9 Gateway Parameter Configuration Tool
A3-168
ME0384-4A
Chapter 3 Gateway Unit
Specifications Section
Editing driver unit configuration
The driver unit configuration editing method is as follows.
Reflect the current driver unit configuration
(1) On the "Axis number assignment / Unit configuration confirmation screen", press
"Current configuration reflection".
(2) The configuration of the actual driver unit will be imported.
(3) Confirm the unit configuration and press "Complete".
It will be reflected in the "Axis number assignment / Unit configuration confirmation
screen".
(1)
(2)
(3)
(4)
1