IAI Rcon - Axis Number Assignment Change

3.9 Gateway Parameter Configuration Tool
A3-167
ME0384-4A
Specifications Section
Chapter 3 Gateway Unit
Axis number assignment change
The operation of axis number assignment change is as follows.
(1) Hardware configuration (reference information)
Displays the driver unit configuration connected to the gateway unit. When creating or
editing, if the configuration cannot be read due to a communication error, the following
screen will be displayed.
(2) Setting status
The axis number assignment can be changed on this screen.
The unit configuration shows the setting of the previous transfer.
(3) Unit configuration edit button
Displays various screens for editing the driver unit configuration displayed in (2). For details
on editing the unit configuration, refer to "Editing driver unit configuration" on page A3-168.
(1)
(2)
(3)