2.5 Connection Diagrams
A2-37
ME0384-4A
Chapter 2 System Configuration and Specifications
Driver Stop Circuit
The 200V driver unit (RCON-SC0 possesses a drive cutoff circuit and the driver stop circuit by
the internal semiconductor instead of an external drive cutoff connector.
The driver stop circuit (DRV STOP) is a feature that cuts off the energy supply to the motor by the
cutoff circuit in the controller after a reaction time (8ms or less) in response to the input signal and
makes a safe stop.
Shown below is an example for wiring for the driver stop feature.
[Connector Position]
Driver Stop Connector
Front View of RCON-SC
To Next Page
Loading...
