3.10 Actuator Information Management Function
A3-183
ME0384-4A
[Maintenance Information]
In addition to the information saved in the RCON system (total travel count, total travel
distance), the actuator maintenance information (travel distance, lubrication time, replacement
time, etc.) can be managed. The actuator maintenance information is saved in the actuator.
Refer to "Maintenance Section Chapter 1 1.4 Preventive Maintenance Function, 1.5 Predictive
Maintenance Function" for detail.
Requests
● To update the actuator's maintenance information, update the information with the
teaching tool. Otherwise, restart the RCON system or perform a software reset.
● If the unit is operated continuously without turning the RCON system off, information
updates to the actuator will not be performed. Take note.
To Next Page
Loading...
