1.1 Conforming to safety category
D1-5
ME0384-4A
Chapter 1 Conforming to Safety Category
[1] -2 Category 1 (When connecting RCON-SC (single-phase 200V))
The electromagnetic contactor cuts off the motor power supply to 24V and 200V.
In this example for a circuit, the drive is cut off at the power supply input connector MP+24V on the
gateway and 200V AC on RCON-PS2. It is also available to have a circuit to cut off at the drive cutoff
connector MPO and MPI on each driver unit and driver stop feature SRI.
To Next Page
Loading...
