1.1 Conforming to safety category
D1-7
ME0384-4A
Chapter 1 Conforming to Safety Category
[Safety category 2] Summary of Requirements
• Follow the safety principles to ensure safe.
• The safety function(s) shall be checked periodically by the machine control system.
[2] -1 Category 2 (When SCON is not to be connected)
In this example of circuit, the electromagnetic contactor cuts off the power input connector MP+24V
on the gateway unit. However, it is available also to have a circuit to cut off the drive cutoff connectors
MPO and MPI on each driver unit.
To Next Page
Loading...
