ICON A5 - Corrosion Inhibitor Application

4-10 STRUCTURES / RINSE AFTER SALT WATER OPERATIONS
ICON A5 / MAINTENANCE MANUAL CHANGE C2
CHAPTER 4
RELATED INFORMATION:
"Rinse After Salt Water Operations" on page 4-4
"Overall Exterior Rinse" on page 4-5
4.2.6 Corrosion Inhibitor Application
After aircraft has been rinsed, an application of a water-displacing, corrosion inhibiting oil such as
Corrosion Zero, LPS 3
®
, or CRC Marine Heavy Duty™ can be used.
TASK INFORMATION:
Type of Maintenance
Line
Level of Certification
Owner/Pilot
Task Specific Training Required
No
Special Tools Required
None
Parts Required
No
Aircraft System and Number
Consumables
None
TASK INSTRUCTIONS:
1. Apply corrosion inhibiting oil liberally to the metal parts of the aircraft.
2. After application, wipe away any excess oil with a rag or paper towel.
3. Use the list below as an application guide.
a. Nose gear fork and steering pivot assembly
b. Nose gear aft door retraction linkages
c. Nose gear self-centering gas spring and cam
d. Nose gear retraction bellcrank and drag link
e. Nose gear leg pivot, forward door pivot, and spring
f. Main gear axle and brake caliper