ICON A5 - Troubleshooting; Basic Electrical System Inspection

ELECTRICAL SYSTEM / TROUBLESHOOTING 6-31
CHANGE C2 ICON A5 / MAINTENANCE MANUAL
CHAPTER 6
6.3 Troubleshooting
6.3.1 Basic Electrical System Inspection
The following is used to inspect the electrical system located behind the Aft Bulkhead Baggage Panel.
TASK INFORMATION:
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
03—Electrical System
Consumables
None
TASK INSTRUCTIONS:
1. Remove (4) Torx-head 10-32 fasteners to remove the Aft Bulkhead Baggage Panel at the rear of
the baggage compartment.
2. Check integrity of all connectors to and from relay unit.
3. Check integrity of all connectors to and from ECU.
4. Inspect condition of wire harnesses for chafing, fraying and damage.
VERIFICATION METHOD:
Check acceptable condition and security of components behind the Aft Bulkhead Baggage Panel.