ELECTRICAL SYSTEM / FUEL PRESSURE SENSOR 6-69
CHANGE C2 ICON A5 / MAINTENANCE MANUAL
FIGURE 6-20
FUEL SUPPLY LINE, SUBASSEMBLY
VERIFICATION METHOD:
The task is completed when the fuel pressure sensor has been removed.
RELATED INFORMATION:
"Headliner Removal" on page 3-37
6.10.3.2 Install Fuel Pressure Sensor
Use the following instructions to install the fuel pressure sensor.
TASK INFORMATION:
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
To Next Page
Loading...
