FLIGHT CONTROLS / PITCH TRIM ACTUATOR 9-55
CHANGE C3 ICON A5 / MAINTENANCE MANUAL
9.7.3.2 Install Pitch Trim Actuator
The pitch trim installation procedure is needed as part of the process of replacing the actuator and
testing its function.
TASK INFORMATION:
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
ICA006821 TRIM ACTUATOR
Aircraft System and Number
06—Flight Controls
Consumables
Tef-Gel
®
1. Mount new ICA006821 trim actuator to the pitch trim bracket by installing the four mounting
cross head screws, washers, and nuts previously removed as shown.
To Next Page
Loading...
