ICON A5 - Clear Filler Neck

10-10 FUEL SYSTEM / FUEL SYSTEM GENERAL MAINTENANCE
ICON A5 / MAINTENANCE MANUAL CHANGE C2
CHAPTER 10
RELATED INFORMATION:
"Empty Weight and CG Measurement While on Gear" on page 3-30
"Empty Weight and CG Measurement While on Jackpoint Scales" on page 3-32
"Remove Fuel Bladder (MY17 Only)" on page 10-11
"Remove Fuel Tank (MY18+)" on page 10-15
10.3.3 Clear Filler Neck
Clear the fuel filler tube portion of the vent line. The fuel filler tube connects the filler cap to the fuel
tank.
TASK INFORMATION:
Type of Maintenance
Line
Level of Certification
Owner/Pilot
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
07—Fuel System
Consumables
None
TASK INSTRUCTIONS:
1. Remove the fuel cap.
2. Pour fuel down the filler tube at a slow rate to confirm free flow of fuel into the tank.
3. After check and confirmation filler tube is clear, replace fuel cap.
VERIFICATION METHOD:
Fuel flows freely into the fuel tank through the filler neck.
RELATED INFORMATION:
"Condition and 100-Hour Inspection—Fuel Systems" on page 3-13