ICON A5 - Maintenance Instructions; Adjust Yaw Rigging; Rigging Yaw Controls

FLIGHT CONTROLS / YAW CONTROLS 9-87
CHANGE C3 ICON A5 / MAINTENANCE MANUAL
CHAPTER 9
FIGURE 9-54
PRIMARY STOP LOCATIONS
VERIFICATION METHOD:
Record results and check against requirements.
RELATED INFORMATION:
"Condition and 100-Hour Inspection—Aft Fuselage and Empennage" on page 3-19
"Re-Rigging Rudder Pedals" on page 9-103
"Adjust Yaw Rigging" on page 9-100
9.10.4 Maintenance Instructions
9.10.4.1 Rigging Yaw Controls
Use the following procedure for rudder rigging.
TASK INFORMATION:
Type of Maintenance
Line
Level of Certification
A&P
Task Specific Training Required