ICON A5 - Canopy Installation

11-4 FUSELAGE AND VERTICAL TAIL / FUSELAGE AND VERTICAL TAIL GENERAL MAINTENANCE
ICON A5 / MAINTENANCE MANUAL CHANGE C1
CHAPTER 11
FIGURE 11-1
BLIND NUTPLATES
2. Remove the canopy from the aircraft being careful not to scratch the canopy frame.
VERIFICATION METHOD:
The task is complete when the canopy has been removed.
RELATED INFORMATION:
"Left Instrument Panel Top Panel Removal" on page 8-19
"Right Instrument Panel Top Panel Removal" on page 8-17
"Left Instrument Panel Top Panel Installation" on page 8-21
"Right Instrument Panel Top Panel Installation" on page 8-18
11.2.2 Canopy Installation
Use the following procedure to install the canopy.
TASK INFORMATION:
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None