9-38 FLIGHT CONTROLS / ROLL TRIM TAB
ICON A5 / MAINTENANCE MANUAL CHANGE C3
06—Flight Controls
Consumables
Isopropyl Alcohol
1. Soften the bond between roll trim lab and aileron surface with isopropyl alcohol.
2. Gently peel the tab off the aileron surface.
3. Clean any excess adhesive off the aileron surface with isopropyl alcohol and a soft cloth.
VERIFICATION METHOD:
Verify the entire trim tab has been removed, the surface cleaned, and the underlying attachment
surface on the aileron is not damaged.
RELATED INFORMATION:
"Install Roll Trim Tab" on page 9-38
"Determine Roll Trim Tab Length" on page 9-36
9.5.4.2 Install Roll Trim Tab
Use these instructions to install the roll trim tab on the aileron after the correct length has been deter-
mined.
TASK INFORMATION:
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
Roll trim tab stock, 90505, 24”
70006738424; 3M VHB Tape 5915WF White, 1/2 in, 16 mil
Aircraft System and Number
06—Flight Controls
Consumables
To Next Page
Loading...
