ICON A5 User Manual

GENERAL / MAINTENANCE SYSTEM FOR LIGHT SPORT AIRCRAFT 2-13
CHANGE C3 ICON A5 / MAINTENANCE MANUAL
CHAPTER 2
Tab l e 2-1: Summary table of level of certification hierarchy. In any instance, task-specific training is in
addition to level of certification.
2.6.6 Major Repairs and Alterations
By definition, major maintenance, repairs, and alterations are not addressed in this MM. Any task not
defined within this MM is considered a major repair or alteration (MRA) and requires prior approval
from ICON Aircraft.
If ICON Aircraft agrees to provide an MRA, then ICON will evaluate the change against the require-
ments of the applicable ASTM standards for compliance and issue a completed MRA Form that
includes detailed instructions for completion and an affidavit that the alteration will still result in an
aircraft that meets the requirements of the ASTM standards. MRAs will require logbook entries and
may also require updates to the Pilot’s Operating Handbook.
Tas k S a y s
Owner/Pilot Can Do
The Task
LSA-RM Can Do The
Ta sk
A&P Can Do The Task
Owner/Pilot X X X
LSA-RM X X
A&P X

ICON A5 Specifications

General

Manufacturer	ICON Aircraft
Engine	Rotax 912 iS
Horsepower	100 hp
Wingspan	34.8 ft (10.6 m)
Length	23 ft (7.0 m)
Height	8.1 ft (2.5 m)
Maximum Takeoff Weight	1, 510 lb (685 kg)
Seating Capacity	2
Type	Light Sport Aircraft
Propeller	3-blade composite
Fuel Capacity	20 gallons
Maximum Speed	109 knots
Cruise Speed	95 knots
Stall Speed	45 mph (72 km/h, 39 knots)
Range	427 nmi (491 mi, 790 km)
Rate of Climb	1, 000 ft/min
Service Ceiling	15, 000 ft