ICON A5 - Center Console Bucket Installation

8-8 EQUIPMENT AND FURNISHINGS / EQUIPMENT AND FURNISHINGS GENERAL MAINTENANCE
ICON A5 / MAINTENANCE MANUAL CHANGE C1
CHAPTER 8
FIGURE 8-5
CENTER CONSOLE BUCKET REMOVAL
VERIFICATION METHOD:
Procedure is complete when the center console is removed.
RELATED INFORMATION:
"Inspect Yaw Cable Tension" on page 9-80
"Rigging Yaw Controls" on page 9-87
"Rigging Pitch Controls" on page 9-46
"GPS Mount and Radio Stack Bezel Removal" on page 8-15
8.2.3 Center Console Bucket Installation
Use the following procedure to install the center console bucket.
TASK INFORMATION:
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
!


