ICON A5 - Approved Engine Coolant Grades and Capacity

GENERAL / APPROVED ENGINE COOLANT GRADES AND CAPACITY 2-29
CHANGE C3 ICON A5 / MAINTENANCE MANUAL
CHAPTER 2
2.19 Approved Engine Coolant Grades and Capacity
Approved Coolant
Conventional coolant based on ethylene glycol with 50% water content.
Coolants with a 50:50 mix of antifreeze and distilled water.
NOTE: The antifreeze should be a low silicate and nitrite-free formula.
NOTE: The following list is based on the experiences and local recommen-
dation by the authorized distributors. Coolant brands, with same
designation, may vary from one to the other region. Please contact
the local distributor for a recommendation.
Coolant Capacity
0.93 US gallons (approximate)
RELATED INFORMATION:
"Cooling System Inspection" on page 16-54
"Engine Test Run" on page 16-7
Brand Description
BASF™ Glysantin Protect Plus/G48
CASTROL™ Antifreeze All-Climate
CASTROL™ Antifreeze Anti-Boil
OMV™ OMV Coolant Plus
PETROL™ Antifreeze Concentrate/Antifreeze G 11
PRESTONE™ DEX-COOL extended life
PRESTONE™ 50/50 pre-diluted DEX-COOL extended life
SHELL™ DEX-COOL
SHELL™ Antifreeze Concentrate
TEXACO™ Havoline Extended Life Antifreeze
VELVANA™ FRIDEX G49
YACCO™ LR-35