ICON A5 - Structures; Basic Structural and Firewall Inspection

INSPECTIONS / STRUCTURES 3-57
CHANGE C2 ICON A5 / MAINTENANCE MANUAL
CHAPTER 3
3.7 Structures
3.7.1 Basic Structural and Firewall Inspection
Inspect the systems and structure behind the Aft Bulkhead Baggage Panel.
TASK INFORMATION:
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
NA
Consumables
None
TASK INSTRUCTIONS:
1. Remove the Aft Bulkhead Baggage Panel. (See “Removal and Installation of Inspection Panels
and Fairings” on page 3-34.)
2. Structural Inspection:
a. Using a flashlight and viewing mirror as required, visually inspect all accessible bond lines
for cracks or damage.
b. Inspect main bulkhead lines (fore and aft) between wing spar and fuselage skin for cracks
and damage.
3. Firewall Inspection:
a. Using a flashlight and viewing mirror as required, visually inspect firewall for cracks along
weld seams, oil stains and coolant/water stains.
VERIFICATION METHOD:
Verify there are no cracks or other anomalies.