ICON A5 - Headliner Removal

INSPECTIONS / GENERAL INSPECTION TASKS 3-37
CHANGE C2 ICON A5 / MAINTENANCE MANUAL
CHAPTER 3
Use the following tasks to remove and install the panels located within the cockpit.
RELATED INFORMATION:
"Rigging Roll Controls" on page 9-20
"Inspect Roll Cable Tension" on page 9-13
"Rigging Yaw Controls" on page 9-87
"Rigging Pitch Controls" on page 9-46
"Condition and 100-Hour Inspection—Parachute" on page 3-18
"Basic Parachute Inspection" on page 19-5
"Parachute Package Inspection" on page 19-7
"Parachute Package Removal" on page 19-8
"Parachute Installation" on page 19-10
"Harness Inspection Instructions" on page 19-14
"Extraction Rocket Inspection" on page 19-23
"Extraction Rocket Removal" on page 19-24
"Extraction Rocket Assembly and Installation" on page 19-25
"Arming Extraction Rocket" on page 19-29
"Activation System Inspection" on page 19-33
"Activation System Installation" on page 19-34
"Harness Installation" on page 19-15
"Inspect, Repair, and Secure Wiring Harness with Signs of Chafing" on page 6-34
3.6.2.1 Headliner Removal
Use this procedure to remove the headliner.
TASK INFORMATION:
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
NA
Consumables
None