ICON A5 - Page 792

19-8 ICON PARACHUTE SYSTEM (IPS) / PARACHUTE PACKAGE
ICON A5 / MAINTENANCE MANUAL CHANGE C1
CHAPTER 19
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
16—ICON Parachute System (IPS)
Consumables
None
TASK INSTRUCTIONS:
1. External Inspection
a. Inspect the parachute egress area for any cracks or displacement of the bond between the
fuselage shell and removable cover.
b. Check the security of all external placards.
2. Internal Inspection
a. Inspect the parachute release pin and tether for security. Verify the surgeon’s knot is
taught and properly holding release pin in place.
b. Check the deployment bag retaining straps for signs of discoloration or abnormalities.
VERIFICATION METHOD:
Verify there is no chafing, discoloration, damage, or other anomalies.
RELATED INFORMATION:
"Removal and Installation of Inspection Panels and Fairings" on page 3-34
"Cockpit Panels Removal and Installation" on page 3-36
19.4.4 Maintenance Instructions
19.4.4.1 Parachute Package Removal
Use the following tasks to remove the parachute package.
TASK INFORMATION:
Type of Maintenance
Line