ICON A5 - Introduction

GENERAL / INTRODUCTION 2-3
CHANGE C3 ICON A5 / MAINTENANCE MANUAL
CHAPTER 2
2.1 Introduction
This maintenance manual provides the standard maintenance and inspection procedures for the ICON
A5. Repairs, alterations, and maintenance tasks included within this manual are considered minor. Task
instructions are valid for any A5 unless a specific Model Year (MY) is called out in the task title. Any
repairs, alterations, or maintenance tasks not listed in this manual are considered major. Major repairs,
alterations, or maintenance tasks require coordination and approval from ICON Aircraft before any
work commences. The minimum levels of certification to perform any minor task are also listed in this
manual.
NOTE: The information in this manual is the best available at the time of
publication. As modifications for product improvement may have
occurred, your aircraft could have a different configuration than
described. Contact ICON Aircraft if your hardware does not match
the instructions in this manual.
This manual was developed in compliance with the ASTM standard F2483, Maintenance and the
Development of Maintenance Manuals for Light Sport Aircraft.